Another first from ANTICO - a multipurpose single inside mounted mechanical seal from CHETRA GmbH. CHETRA GmbH a
German seal manufacturer is well known in European market for custom made Mechanical Seals for critical applications.

 

 

Advantages of 202ATC Seal over a conventional Double Seal :

Several non metallic pump users opt for a Double Mechanical Seal with Thermosyphon system (API Plan 53) for applications involving Temperatures above 80°C or Slurries less than 20% by weight. This selection is more so out of compulsion than by choice. This is because, the conventional Outside Mounted Single Seals cannot perform under the above conditions.

Use of 202ATC seal for the above applications gives users several tangible benefits.

• Low Capital Expenditure - eliminates the need for API Plan 53 Accessories.

• Low Operating Cost - eliminates the need for Barrier Fluids.

• Low Failure Cost - replacement of a double seal is obviously higher as compared to a single seal. Often, Super Alloy Shaft Sleeve comes for replacement in case of Double Seal failures. This is not observed with 202ATC since Sleeve is away from the Process Media.